| |
|  | |
|  | | |
| The arrow is pointing right at one of the 6 Hangers which protrude from the outside of the Growing Vessel just below the rim which the Dome Lid rests on. | |
| This arrow is pointing right at one of the 6 Bumps which protrude along the lip of the Solid Base. | | |
| Place the Growing Vessel so the Hangers rest between the Bumps on the Solid Base.
These Bumps are inverted on the inside of the Solid Base. They are what hold the Hangers in the elevated poition shown above.This is the correct position for sprouting.This position provides excellent air circulation and allows excess water to drain into the Solid Base between rinses. Not that you'll have any excess water to drain =;-> | | |
| | | |
| | |
| | | | | | | | | | | |