|
||||||||||||||||||||||||||||||||||||
 |
   |
Easy Sprout
Our favorite all-purpose (sprouts - not grass or greens) sprouting device, the Easy Sprout has:
Excellent Drainage, Superior Air Circulation and is the most forgiving sprouter we know.
Devoted Sproutpeople everywhere worship it.
What would Jesus sprout (in)?
=;-D
Easy Sprout is 3 1/4 inches on the bottom and 4 1/2 inches on the top. It is 7 inches tall. It has a 1 liter/quart capacity.
It is made of High Density Polyethylene (Fortiflex® T50-3600 HDP) - which is one of the few non-leaching plastics.
The Easy Sprout is also Kosher - we kid you not.
It came to the inventor Gene Monson in a dream in the late 1970's and he has spent much of his life since spreading the word.
The Parts:
1) Growing Vessel
2) Base (solid)
3) Small Seed Insert
4) Dome Lid
5) Flat (storage) Lid
6) Flat Vented Travel Lid (not pictured)
It looks exactly like #5, but it has holes in it.
|
|
Sprout School & Shop Sprouting Seed Info Center
|
The Easy Sprout has a 1 quart growing capacity.
It can produce up to 1 pound of Alfalfa/Clover Sprouts or 2 pounds of Bean or Grain Sprouts.
Excess water drains into the solid base (though you still need to drain thoroughly), so you can leave it anywhere without worrying about making a mess.
With the snap on Vented Flat Lid (which looks just like #5 in the picture above, except that it has holes in it) and a simple re-design which allows great air circulation even with the Growing Vessel sitting down in the Solid Base, you can take your Easy Sprout(s) everywhere you go. Now you can Easy Sprout while travelling!
Eat More Sprouts + Grow More Often - Easily!
Seeds to Sprout
In the Easy Sprout
The Easy Sprout is able to sprout just about any seed well.
That is a big part of why we recommend it so highly.
These seeds are a Perfect match for the Easy Sprout:
Leafy Sprouts: Alfalfa/Clover and Mixes - All
Alliums - Garlic, Leek and Onion
Beans - All (see Mung Note below)
Mung Beans - It is only the inability to keep light out that is problematic, but that is outweighed by the perfection of the shape, drainage and ability to apply weight. Invert the Dome Lid (dome down into Growing Vessel) while sprouting and put weight on or in it. You should soak 1 cup of Mung Beans if you want to grow the biggest thickest roots as the mass created by the high volume of beans will aid in the root growth.
Brassicas - Broccoli, Radish, Mustard, Cabbage, etc.
Grains - All
Nuts and Seeds - Almonds, Pumpkins, Peanuts, Sunflower, etc.
Pre-Sprout
The Easy Sprout is also a great Pre-Sprouter for: Grass, Greens and certain Micro-Greens.
The Easy Sprout is a great Pre-Sprouter for these items, but it is not designed to grow these crops to completion:
Grass - Neither Grass nor Greens will grow well, in the Easy Sprout, but it can be a fun experiment.
Grass will grow without soil and can stay moist in the Easy Sprout - and get quite tall. It takes longer without soil, but in theory you can juice the entire mass (grass, grains and roots) so it may be worth a try - just for the fun of it.
These Greens can work as an experiment:
Buckwheat Lettuce
Pea Shoots
Radish Greens
Spicy Salad Greens
The depth of the device is the only issue, but they all grow fairly well without soil, so give it a try if you're looking to EXPERIMENT.
Difficult to Impossible:
Other Greens and Micro-Greens will not work well - even as an experiment. Most require more horizontal freedom and some (the sunflowers especially) do much better with soil. But - don't let us stop you from trying! You should remember that some of the Micro-Greens are mucilaginous and therefore form a sticky gel sack. Those seeds will make a mess of your sprouter and they will never sprout!
Easy Sprout
Sprouting Instructions
Specific Sprouting Instructions are found on
the page devoted to the Seed or Mix you are interested in.
Below are the specifics of the Easy Sprout
Not all seeds require this step. See the seed information page to see if you need to do this for the seed you are sprouting.
Since the Easy Sprout drains from the bottom it is the perfect device for cleaning your seeds prior to soaking. If you are sprouting small seeds, snap the Small Seed Insert into the bottom of the Growing Vessel. Put your seeds in the Growing Vessel and run water through them until the water runs clear.
Place the Growing Vessel - now with clean seeds - into the Solid Base. Fill with cool (60 - 70°) water unless instructed otherwise by your seed supplier (us we hope =;-) and leave to soak for 8 - 12 hours or for the time noted for the seed you are sprouting.
It is optimal to remove the Growing Vessel and hold it under your tap or sprayer. This allows you to use water pressure (we like our water pressure high). Make sure all of the sprouts get thoroughly wet by moving the Easy Sprout or by moving your tap or sprayer. As an average we will run water through for about 15-20 seconds at every Rinse, but there is no hard rule. Always use cool (60 - 70°) water unless instructed otherwise by your seed supplier.
Sprouting
In between Rinsing and Draining your Easy Sprout does best while set up with the Growing Vessel sitting higher than the Solid Base and with the Dome Lid resting on the Growing Vessel's lip (the Dome Lid may be dome up or dome down - it makes no difference). But, since all Easy Sprouts sold since fall of 2000 include a new design you have the option of 1. Not elevating the Growing Vessel and 2. Using the Flat Vented Lid instead of the Dome Lid (The Flat Vented Lid was designed specifically for Travel Sprouting), so do as you will.
Bounce the Growing Vessel against the side of your sink, Shake it, Spin it. You can't break this wonderful device so go for it! Get all the water out after each rinse because as we know - seeds will not germinate in standing water and sprouts that sit in water will rot - which really smells bad.
Keep Reading.......There's more!
|
Seed Specific BeansFollow instructions on this page and on the seed's page (follow the links when you get there) for all beans. If you wish to grow big thick rooted Mung Bean sprouts - see below.... Mung BeanMungs will grow bigger thicker roots if weight is applied to them. The other key to Mung sprouting is to keep the seeds/sprouts in place. Rinse with a sprayer (if your sink has one) and keep the water pressure low enough to keep the beans from moving. This will make the roots grow down (it's a nature thing) and because space is tight the roots will grow thicker (it's a mung thing). Mungs are the only bean sprout we do this with. Here: After the initial Rinse - following the soak period - apply weight to the beans by resting the filled Solid Base of a second Easy Sprout directly atop your soaked mungs. When you Rinse 8 -12 hours later use a gentle spray - Drain well but keep the seeds movement to a minimum. Re-apply the weight. 8 - 12 hours later Rinse and drain again keeping the seed/sprout movement to a minimum. Keep repeating this Rinse/Drain/weight thing until either your sprouts are done or they grow too high to allow the weight to stay put. If they grow that high; discard the weight and just Rinse and Drain until your sprouts are done - which is usually 4 - 5 days. BrassicasBroccoli, Radish, Cabbage, Mustard, etc. need to move while sprouting or they will form a root mass which is at least unpleasant and often lessens the sprouts' quality. Solution: Rinse with high water pressure. The intent is to make the sprouts "dance". Often by day 3 or 4 your sprouts will be in too tight a mass for the water pressure to dislodge them, so take a fork or use your hands to loosen them up. Alternately, you can transfer the sprouts to the Solid Base, fill it with water, use the fork or hand - it is often easier to break up the mass while they are in water. Keep breaking up the mass at every rinse. Leafy Sprouts |
||
|
Easy Sprout Assembly |
||
|
 |
|
|
|
||
|
For Soaking: Place Growing Vessel in recessed position inside of Solid Base. The Growing Vessel (1) is now in a recessed position where the rim of the Base (2) is higher than the Growing Vessel. |
|
|
|
|
||
 |
When Rinsing: Remove the Growing Vessel and hold under your tap or sprayer. |
|
|
|
||
 |
While Sprouting:
1) Make sure the "Hangers" on the outside rim of the Growing Vessel are sitting on top of "Bumps" inside of the Solid Base. |
 |
 |
2) Rest the Dome Lid - in the upright position - on the lip of the Growing Vessel.
|
|
|
This is how the Easy Sprout looks while you are sprouting. The Dome Lid (4) rests on top of the Growing Vessel (1). The Growing Vessel is in its elevated position for optimal air circulation. Though the new design (all sprouters which included a vented flat lid) makes it theoretically unnecessary to elevate the Growing Vessel during sprouting, it is still optimal to do so. Travelling or Not: You may set the Growing Vessel inside the Solid Base and snap the Vented Flat Lid onto the Solid Base. Though the Vented Flat Lid is specifically for Travel Sprouting, it can be used at home - if you insist. |
||
For Soaking: Place Growing Vessel in recessed position inside of Solid Base.
Easy Sprout is 3 1/4 inches on the bottom and 4 1/2 inches on the top. It is 7 inches tall. It has a 1 liter/quart capacity.
It is made of High Density Polyethylene (Fortiflex® T50-3600 HDP) - which is one of the few non-leaching plastics.
The Easy Sprout is also Kosher - we kid you not.
Cleaning: Scrub well between crops with soap and water. Rinse well!
Sterilize: Scrub and soak in bleach water. We do this every 3 - 4 crops because a clean sprouter produces better sprouts and because the sprouter looks better when clean (it discolors when sprouting any pigmented seeds).
SPROUTPEOPLE®
170 Mendell St.
San Francisco, CA 94124
Toll Free:
877/777-6887
(877/SPROUTS)
We only use the phone for emergencies.
Back in 2001 we were still using the phone. One day I was talking to a long-time customer while pushing my (then 4 year old) daughter on the swing in our backyard (this is what a mom n' pop business is like on the internet). It dawned on me that my priorities were severely messed up, so I stopped using the phone. I love to talk and I love to help, but my family would never see me if I picked up the phone again, and that's just wrong don't you think?!
The very best way to contact us is through E-mail =:-)
We are quite fast and VERY thorough. We love to help.
We have been an internet only business since 2001. We are not a big corporation. We are but 2 people, Mom n' Pop Sprout. We decided after years of juggling our family's (kids, dogs, cats and even our own) needs, and the needs of Sproutpeople, that we had to make more time for our kids, so we stopped talking on the phone. All calls go to voice mail and have since 2001.
We are very fast to fill orders and answer e-mail, and though we wish we could make the time to talk, we just can't seem to get more minutes into a each hour. We are many years older than when we started and our days are too short and made up of too few hours to do everything. This limitation in our business has not kept us from pleasing our customers, nor from growing (as we have every year since 1993). We do what we do as well as we can, and we think we do it very well indeed.
We appreciate your patronage more than we can say. We ask that you use the phone for emergencies only and that you search our site for answers before e-mailing us. This site is bigger than any 4 sprout books put together, it is always available and it is free, and we know that almost all questions are answered here.
Thanks again for your support and your many kind words.
Sproutpeople